100% Dod 20000 Cycles 2.3V 60ah Pouch Lithium Cells Lto Battery for Enrgy Storage Power Station Battery Pack

• Type: Li-ion Battery
• Cathode Material: LMO
• Rechargeable: Yes
• Size: Medium
• Application: Electric Vehicle, Hev,Bev,EV
• Nominal Capacity(mAh): 60ah
• Model NO.: 2.3V 60Ah
• Cycle Life: More Than 25000 Times
• Tab Structure: Single for Cathode/Double for Anode
• Weight: About 1.18kg
• Transport Package: Carton
• Trademark: CNS
• Origin: China
• HS Code: 8507909000
• Production Capacity: 200000PCS/Day

Product Description

100% DOD 20000 cycles 2.3V 60Ah Pouch lithium cells lto battery for enrgy storage power station battery pack
 

Product Description

Product Introduction
Lithium titanate battery is a lithium-ion battery with lithium titanate (LTO) as the negative electrode material. The product has superior performance and belongs to the new generation of high-end lithium battery products. Lithium titanate batteries have advantages such as high safety (spinel structured nano LTO), long cycle life (up to 20000 cycles), fast charging (peak charging rate up to 5C), fast discharging (peak discharge rate up to 10C), wider high and low temperature performance (-30 ºC -55 ºC), low temperature rise, etc. Moreover, the life cycle cost of lithium titanate batteries is much lower than that of traditional carbon negative electrode materials such as lithium iron phosphate, lithium cobalt oxide, ternary lithium, etc. on the market, which has the advantage of higher cost-effectiveness.


Our LTO battery, just as its name, use Lithium Titanate as raw material, the LTO material belongs to spinel structure, the charge  / discharge volume changed is very small , called " zero strain " material . This" zero strain " performance can avoid structural damage caused by repeated expansion and contraction of the graphite layer , and improve the service life and the safety performance of the battery , also has excellent high C-rates and low temperature characteristics.  The SEI film is difficult to generate on the surface of LTO negative , with a high deintercalation electric potential ( about 1.55V ) , without safety accident risk lead by metal  lithium precipitation.

Compared with traditional materials of NMC and LFP , the LTO battery has the outstanding advantages in safety, cycle life and low temperature performance, its battery  products can be both energy storage and power supply system. such as electric buses, electric forklifts, traction electric vehicles, special devices, wind energy and solar energy storage, microgrid energy storage, traffic signals, wind and solar complementary street lights, UPS power sources, household/industrial energy storage, coal mines, disaster assistance emergency systems, weather radars, smart grids, communication base stations, hospitals, finance, telecommunications and other backup power systems, and other energy storage applications, as well as  shipping, aerospace and other fields.

Pouch 2.3V 60Ah battery cycle life is more than 20000 times at 100% DOD, widely used in all kinds of energy storage and power supply scenario.

UN38.3, MSDS, Specification, CB, Certificate for safe transport all available to make sure the smooth delivery.

It is 9 class goods, but we have own battery channel to arrange samples for our customers if they need.

Product Parameters

 

Model	2.3V 60Ah
Rated Capacity	60Ah
Rated Voltage	2.3V
Resistance(AC)	<0.5mΩ
Weight	1.75Kg
Energy Density	≥79Wh/kg ≥170Wh/L
Power density	1400W/KG 3200W/L
Dimension	13×266×263mm
Standard Discharging	1-8C/1.5V (Constant Current/Cut-off Voltage )
Standard Charging	1-5C/2.8V (Constant Current/Cut-off Voltage )
Cycle life	>20,000+cycles at 100%DOD
Operating tempt.	-30ºC-60ºC
Storage Tempt.	-10ºC-45ºC

 

LTO battery cell series
Model	Nominal Capacity	Nominal Voltage	Weight	Dimension	Operating Temprature
2.3V/16Ah	16Ah	2.3V	650g+/-10	110*13.1*216mm	-30ºC-60ºC
2.3V/20Ah	20Ah	2.3V	680g+/-10	135*14*165mm	-30ºC-60ºC
2.3V/25Ah	25Ah	2.3V	880g+/-10	135*14*206mm	-30ºC-60ºC
2.3V/26Ah	26Ah	2.3V	1080g+/-10	115.5*32.6*170mm	-30ºC-60ºC
2.3V/60Ah	60Ah	2.3V	1750g+/-10	266*13*263mm	-30ºC-60ºC

 

Application

Pouch Lithium Titanate pouch cell lto battery widely used in both the energy storage and the power battery system.

In the energy storage system, like the portable power station, standby/backup power sypply of enterprise and institution computer network center, monitoring power supply, offices, hospitals,  the household power storage, UPS Power supply, communication backup power supply, micro grid energy storage system, photo-voltaic energy storage system, photo-voltaic street lamp, Photo-voltaic energy storage inverter, wind/photo-voltaic power generation system, high voltage DC power supply.

In the power battery system, like the electric bus battery, electric forklift battery, electric high-voltage forklift battery, traction locomotive battery, RTG container Crane.

 

Packaging & Shipping

Our LTO battery is strictly produced, tested, stored and delivleried according to the industry high standard.

All the cells are packed in UN 3480 carton. Serious Commercial inspection are done before goods leave our warehouse.

Full  set UN38.3, MSDS, sea  transport identification, air transport identification, Dangerous package certificate are for the smooth delivery and export.

 

Company Profile

We are direct factory since 2011, and supply all kinds of batterys according to customers' demand, car batteries, home energy storage batteries, heavy duty Veihcle Batteries, Road Cleaning truck battries, Toys, Power Tools, Home Appliances, Consumer Electronics, BOATS, Golf Carts, SUBMARINES, Electric Bicycles/Scooters, Electric Folklifts, electric vehicles, Electric Wheelchairs, Electric Power Systems, Solar Energy Storage Systems, Uninterruptible Power Supplies(UPS), low temperature, high temperature special batteries, etc.

And we have the world first class productionline and test equipments, to make sure the cost-effctive price with stable quality and supply ability.

Quality Control

From initial design to final production, we prioritize manufacturing quality to ensure that CNS Product not only meets but exceeds industry standards.

Our team of experts meticulously oversees every step, employing stringent quality control measures that guarantee the reliability and long-term performance of our storage solutions.

Our state-of-the-art laboratory serves as the foundation of our commitment to quality. We conduct comprehensive performance testing, analyzing every aspect of our batteries to ensure they meet the highest benchmarks.

This meticulous approach ensures that our customers receive battery systems they can rely on, even in the most demanding applications.

FAQ

Q1: What is your terms of payment?
A: 30% deposit in advance, 70% balance against goods ready.We'll show you the photos of the products and packages before you pay the balance.

Q2: Can you print my logo on the battery cover?
A: Yes, OEM is available,we can print your logo on the battery case, and you can offer your logo.

Q3: How to maintain the battery?
A:The battery should be stored in clean, dry, ventilated, dark environment when not using, keep it after full charge, recharge it every 3 months or 6 months.
Q4: If a battery fails, what will be the indications?
A: 1.Lower performance
2.Low voltage
3.Cannot charge/recharge
4.Swelled container
5.Acid corrosion
Q5: How can you tell if a battery is good or bad?
A: You should first check the battery for defects such as a broken circuit, a short, or a broken container. If an outward problem is not apparent, then you will have to check the battery's capacity using known measuring techniques to ascertain the problem.
Q6: Do you test all your goods before delivery?
A:Yes, we 100% test before delivery.